Waterproofing Chemicals

Approx. Rs 1,500 / LitreGet Latest Price

Product Details:

Ultratech Seal & Dry SBR is a styrene butadiene latex co-polymer, multipurpose bonding agent used for repairing of structures/concrete and waterproofing and bonding slurry. It reduces shrinkage cracks & improves abrasion resistance.

Approx. Rs 150 / Per CanGet Latest Price

Product Details:

Areas of Application

UltraTech Seal & Dry ILW+ can be recommended to use withconcrete and mortars in external internal plastering, slabs,beams, columns & basements to make them waterproof

Method of Application

Mix Cement & fine / coarse aggregates as per mix design forconcrete and mortars/plasters.Add water 60-70% initially and mix it for 2-3 min.Add 200ml to 300 ml Seal & Dry ILW+ (per 50 kg bag of cement)into the remaining water, Add this to prepared concrete or mortarand mix it for another 2-3 min. Prepared Concrete or Mortarcan be placed as per need. Curing needed as per goodconstruction practices.
Precaution: Maximum dosage 200 ml to 300 ml per 50 kg ofcement is recommended depending upon the type of cement forexcess dosage requirement please test the mix for cohesiveness,workability and concrete strength.

Shelf life of 24 months from the date of manufacture.

Approx. Rs 2,000 / KgGet Latest Price

Product Details:

Ultratech Seal & Dry - Hiflex Is A Two Component, Cement Based, Acrylic Emulsion Polymer Based Elastomeric, Waterproof Coating Incorporated With High Quality Polymer Additives, And Fillers For All Positive Side Water Proofing Applications.

Features And Benefits
:>100% Elongation @ Tensile Force 2 Of 50 kg/cm Water Resistance Up To 7 Bars Water Pressure @ 1 mm Resistant To Occasional Foot Traffic Excellent Breathability Through The Applied Membrane Consistent Quality Made Using High Quality Polymers, Additives And Fillers No Water Curing Strong Adhesion To Substrate Convenient To Apply Faster Completion Of Work Negligible Wastage Due To Higher Pot Life Brush Application Consistency High Positive Side Waterproofing Ability Non-toxic Good Chemical Resistance Against Soft Water, Domestic Waste WaterAreas Of Application: Ultratech Seal & Dry - Hiflex Can Be Used For Positive Side Water Proofing Of Terrace, Slope Roofs, Balcony, Domes, Swimming Pools, Sump Tanks, Exterior Walls. It Can Be Used Effectively Over Concrete Surfaces, Natural Stones, And Marble & Granite Bottom Areas. Ideal For Large Spans Of Old And New Surfaces Of Any Geometry. Highly Suitable For Demanding Applications With Area Greater Than 10,000 Square feetApplication:??? Use Soft Bristle Brushes To Apply Ultratech Seal & Dry - Hiflex To Have Uniform And Required Thickness In 2 Coats One Perpendicular To The Other. Second Coat Can Be Applied After A Minimum Gap Of 24 Hours During Normal Climatic Conditions. Average Thickness Of Each Coat Should Be In The Range Of 0.4-0.5 Mm And Number Of Coats May Be Increased To Achieve Higher Thickness As Per The Demanding Application Areas??? It Is Recommended To Adopt A Sandwich System Of Application If Ultratech Seal & Dry - Hiflex Is Applied In Exposed Areas Like Roofs And Terraces Ultratech Floorkrete With 8 Mm Down Aggregate @ 1:1 Mix Ratio As Top Screed Is Recommended Over Ultratech Seal & Dry - Hiflex Coated Areas For Enhanced Life Ultratech Super Stucco Is Suggested As Top Screed Over Domes And Sloped Roofs For Screed Thickness < 6 MmNote: Ultratech Seal & Dry - Hiflex Waterproofing Specifications & Method Statement Needs To Be Strictly Followed To Derive The Complete Product Performance. The Technical Data Provided In This Technical Data Sheet Is As Per Our Internal Lab Testing And May Vary As Per The Actual Method Of Application At Sites Care To Be Taken To Avoid Thickness Of Application Greater Than 0.5 mm In Each Coat To Avoid Any Material Disassociation Especially In High Undulated Surfaces. Consult Ultratech Building Products Division Technical Services Cell For Any Further Technical Assistance
Safety Directions: Ultratech Seal & Dry - Hiflex Is Non-toxic. Use Of Gloves Recommended. Any Splashes To The Skin Or Eyes Should Be Washed Off With Clean Water Immediately. In Case Of Prolonged Irritation, Medical Advice Should Be Sought. Ultratech Seal & Dry- Hiflexis Non-flammable.